Plugin workflows
Linear-phase vs minimum-phase EQ: when to change modes
Choose a phase mode by testing the parallel sum, transient onset and monitoring delay, rather than assuming linear phase is a quality upgrade.
For an ordinary track, start with the EQ’s practical low-latency mode. Investigate linear phase when differently filtered copies of related material need to combine. Minimum-phase filtering changes relative phase across frequencies; linear-phase processing preserves their relative timing with a common delay, but can introduce pre-ringing.
By Spectraforge Audio2 min read
Published
Guide review: Captum Records and AS Mastering. AI-assisted writing and source checks. How these guides are made.
Start with the relationship between signals
Linear phase describes phase response, not freedom from nonlinear distortion. An EQ can be a linear system and still have frequency-dependent phase. Separate any saturation, crossover or modulation stage when investigating a blend problem.
Compare a dry bus with its filtered copy
In a practice project, duplicate a drum bus and EQ one copy. Fix the blend and routing, then switch that EQ’s phase mode. Allow delay compensation to settle after each change. Listen to the combined snare body and cymbal edge before soloing the processed copy.
If the blend becomes hollow in one mode, first reduce the EQ move and confirm alignment. A more pleasing sum is a reason to retain another mode; an attractive solo sound is not enough. The existing parallel-processing guide covers routing and compensation faults separately.
Listen before an exposed attack
Compare the actual low-end EQ move on isolated kicks with silence before each hit. Listen before the attack as well as to the body. A soft precursor or less distinct edge can expose pre-ringing in a linear-phase setting. Try a less severe filter or another mode and repeat in the full arrangement.
Pre-ringing is not guaranteed to be audible: filter shape, resolution and masking matter. Pro-Q 4’s manual makes the latency/resolution tradeoff explicit. Increasing resolution should answer a specific audible problem, rather than serve as an automatic mastering upgrade.
Choose a mode that works during recording and export
Compensated playback and live monitoring are different jobs. A performer still hears processing delay in the monitored path, and a host’s low-latency mode may change the routes being compensated. Use a simpler temporary monitoring chain when needed, preserving the intended mix settings.
Restore the final mode before rendering, allow compensation to update, and compare the export’s timing and attacks. Keep a note of the problem the mode solved. If the routing changes, revisit that decision rather than preserving extra latency without a reason.
Technical references
Listening exercises are proposed practice routines. Worked examples illustrate the stated setup; they are not reports of our listening tests. Editorial process and corrections.