Spectraforge Audio

Plugin workflows

Peak vs RMS compression: choose what the detector should follow

Compare peak and RMS detection on bass and percussion, retune the threshold fairly, and separate the detector from peak protection.

Compare peak detection when isolated attacks need restraint; compare RMS detection when the sustained body or average energy of a phrase is the concern. Ableton Live’s Compressor documents RMS mode as less responsive to very brief peaks than Peak mode. Neither choice guarantees transparency, and both still depend on timing and the processor’s design.

By Spectraforge Audio3 min read
Published

Guide review: Captum Records and AS Mastering. AI-assisted writing and source checks. How these guides are made.

Choose the event the detector should notice

The detector is a measurement path that controls gain. Changing it is different from changing which audio passes through the compressor. This distinction matters when a low note makes the whole signal dip: detector filtering can alter what triggers reduction without applying that same filter to the audible track.

Compare pluck control with note-body control

Use a bass phrase with a sharp pluck, a held note and a softer note. Keep timing, ratio and output options fixed, then switch between the detector modes. At the same threshold, note whether reduction follows the pluck or persists through the held body. This first comparison exposes the detector’s response; it does not choose a finished setting.

Now retune threshold separately in each mode to solve the actual problem. Match output level and listen with drums. If the plucks are the distraction, ask whether they stop leaping forward without making sustained notes too weak. If note body is uneven, ask whether that body sits more consistently while accents remain intentional. The useful winner may differ between those two tasks.

When a mode change seems to fix the wrong thing

Suppose a low bass note drives more reduction than its neighbors. Audition the sidechain if available, then compare a modest detector-filter change with the original setting. You are checking whether excess low-frequency trigger energy is steering the compressor, rather than concluding that RMS itself is unsuitable. The Ozone 8 manual supplies a documented detector-filter example; this is a legacy-version reference, not a statement about every current Ozone edition.

If filtering makes the offending note escape control altogether, restore sensitivity and consider editing that note. On percussion, use the same logic for an exceptional rim hit: flattening every ordinary tap to catch one event is a reason to treat that event separately.

Keep detector choice separate from delivery measurements

Peak detection does not establish an output ceiling. Attack, reduction range, makeup gain and later processing can leave peaks above the level you need. Check the actual final output for a delivery task. Likewise, RMS is an energy measure, not a LUFS target; loudness standards apply their own weighting and gating.

Before committing, check another bass register or a busier drum fill. Save the observation that justified the mode, such as controlled plucks with recognizable note starts. If retuned, level-matched versions provide equally useful control, there is no further detector problem to solve.

Technical references

Listening exercises are proposed practice routines. Worked examples illustrate the stated setup; they are not reports of our listening tests. Editorial process and corrections.

Help

Spectraforge Audio support

Send us a message and we’ll reply by email. Zoho Desk handles your message and any attachments. Privacy policy

Form not loading? Email info@spectraforgeaudio.com.

Your privacy choices

With your permission, Google Analytics measures site use and Meta measures advertising performance. Both are optional. Privacy policy

Privacy settings

Choose which optional tools can run. Your purchases and licence access work with both turned off.