Mixing
Bus compressor stereo linking: keep the image steady while controlling peaks
Compare linked and independent left/right gain reduction, listen for image movement, and avoid confusing stereo linking with mid/side processing.
Fully linked left/right compression applies common gain reduction to both channels; independent action can change their level relationship when an event is stronger on one side. Start linked when image stability is the concern, then compare less linking if a side accent pulls down useful material on the opposite side. Linking does not center the original instruments or create width.
By Spectraforge Audio3 min read
Published
Guide review: Captum Records and AS Mastering. AI-assisted writing and source checks. How these guides are made.
Link gain changes when independent action moves the image
A calculated example isolates the principle: a centered signal has equal left and right levels. If independent processing reduces the left by 4 dB and the right by 1 dB at one moment, that centered contribution now has a 3 dB channel imbalance. Applying 4 dB to both preserves its left/right ratio but also reduces the right side more. These are assumed gain values, not measurements from a plugin.
Compare on a side accent and a centered lead
Choose a stereo drum phrase with an off-center tom or percussion accent, plus a centered kick or vocal. Save linked and independent versions with other settings fixed. Temporarily exaggerate reduction to learn what changes, then return to the intended amount before choosing.
Listen to the location of the centered element during the side accent, then to the accent’s emphasis. Independent action may make the apparent image sway; linked action may create an unnecessary common dip. Match overall listening level and compare several repetitions. With a variable link control, a few distinct positions are more informative than chasing tiny percentage changes before identifying a problem.
Find out which gain stage the control links
Pro-C 3 documents ordinary left/right linking from 0% to 100%. Beyond that range, its control enters additional mid/side processing choices. That is a change of job rather than simply extra stereo linking. Check labels before copying a percentage from another processor.
Pro-L 2 separately links its transient and release stages. Such a limiter can use different channel coordination for brief peaks and slower movement; an ordinary bus compressor may expose only one linked response. Percentages across those designs do not describe a universal calculation. Judge the specific stage and event being processed.
Check stability through the final chain and in mono
Play a sparse verse, dense chorus and asymmetric transition with later limiting restored. Keep the choice that preserves the intended lead position and rhythm at the amount of compression you need. If both extremes disturb the image, compare less compression or revised timing before assuming an exact linking percentage will repair it.
Make a mono check separately. Common gain reduction does not repair phase cancellation already in a wide source, and a stable stereo lead does not guarantee that every supporting part survives channel summing. Use the width and mono guide for that investigation; stereo linking’s task here is coordinating the compressor’s gain movement.
Technical references
- FabFilter Pro-C 3: stereo linking and mid/side options
- FabFilter Pro-L 2: separate transient and release channel linking
Listening exercises are proposed practice routines. Worked examples illustrate the stated setup; they are not reports of our listening tests. Editorial process and corrections.